Stainless Steel Wheel Pant Brackets
and
Tip Up Canopy Latch
| |
Fairings-Etc. home
Stainless Steel Wheel Pant Brackets and Tip Up Canopy Latch |
Stainless Steel Wheel Pant Brackets (click on picture for larger view) |
Stainless Steel Wheel Pant Brackets
are made from .060 stainless steel and should fix the problem RV
builders are having with the aluminum brackets. These brackets are
stronger and have increased durability in the high vibration area of the
wheels.
These brackets fit all RV's with the pressure recovery wheel pants, except for the RV-8. Use the instructions that came with your wheel pants provided by Van's for the RV aircraft. We do recommend you drill the holes in the wheel pant brackets first and use those holes as a guide to drill the holes in the wheel pants.
|
| This set of Stainless Steel Wheel Pant Brackets sells for $100 plus shipping and handling and sales tax where applicable. Order on line using the order form. | |
View One of Tip Up Canopy Latch Unassembled (click on picture for larger view) |
Heavy Duty Tip Up Canopy Latch
When you see this latch, you will wonder why someone hasn't made this improvement a long time ago. It has a positive snap, and a spring holds it locked in position. The 2 piece latch set comes as pictured except no lighting holes have been made.
|
View Two of Tip Up Canopy Latch assembled and closed (click on picture for larger view) |
Latch is flush on outside of fuselage and the door lock that comes with the mag / start key set can be used to lock it. |
View Three of Tip Up Canopy Latch assembled and open. (click on picture for larger view) |
The latch opens from the inside the same way as the old latch and opens from the outside by pushing in on a flush button located on forward latch. |
| This Tip Up Canopy Latch, two pieces, can be purchased for $85 plus shipping and handling and sales tax where applicable. You may order this on-line by clicking on the Order Form. |
| Contact |
|
Links |
Copyright © 1999 Fairings-Etc. All rights reserved.
Revised:
April 09, 2008